FA: Swan Cygnet 260 HF Transceiver
 

http://cgi.ebay.com/ws/eBayISAPI.dll...tem=3076292602

Working - sort of - long sad story at above link. This was
my 2nd HF SSB rig when I was a teenager in the 70's.
Full details at above link.

Thanks

Update on the Swan 260 -

On the advice of a kind ham who wrote to me, I have replaced the
final tube (6LQ6) and now have about 100 watts on the three lower
bands. Seems when the 1 ohm resistor (that I replaced) burned it
took the tube too. But there's lots of carrier when you key the mic, so the
carrier balance is off. At least it again has lots of RF output!

GS


"GS" wrote in message
news.com...
http://cgi.ebay.com/ws/eBayISAPI.dll...tem=3076292602

Working - sort of - long sad story at above link. This was
my 2nd HF SSB rig when I was a teenager in the 70's.
Full details at above link.

Thanks

Or you need to neutralize the new final.

"GS" wrote in message
news.com...
Update on the Swan 260 -

On the advice of a kind ham who wrote to me, I have replaced the
final tube (6LQ6) and now have about 100 watts on the three lower
bands. Seems when the 1 ohm resistor (that I replaced) burned it
took the tube too. But there's lots of carrier when you key the mic, so
the
carrier balance is off. At least it again has lots of RF output!

GS


"GS" wrote in message
news.com...
http://cgi.ebay.com/ws/eBayISAPI.dll...tem=3076292602

Working - sort of - long sad story at above link. This was
my 2nd HF SSB rig when I was a teenager in the 70's.
Full details at above link.

Thanks