Need Value From Heath HW-9/PSA-9 Schematic
 

I have a new to me Heath QRP combo. The PSA-9 power supply has one resistor in
it and it is fried. I would appreciate it if someone with a manual could look
up the resistance/wattage of the resistor in the power supply

73 Randy

W9zr wrote:
I have a new to me Heath QRP combo. The PSA-9 power supply has one resistor in
it and it is fried. I would appreciate it if someone with a manual could look
up the resistance/wattage of the resistor in the power supply

73 Randy

I thought that there was 2 resistors in the PSA-9. There should be a 1
ohm 2w resistor, and the 1500 ohm 1/4 resistor.

You may also want to check out the following web page. There are some
suggestions on power supply modifications.

http://www.qsl.net/kk4kf/hw9-mods.html

--
Martin E. Meserve

Some info on the PSA-9 at URL:
http://www.qsl.net/kk4kf/hw9-mods.html#j

Also check BAMA (BoatAnchor Manual Archive) -- may be a schematic there
http://bama.sbc.edu/heath.htm

--
From one currently in the Cloaked Mode

Any clod can have the facts, but having opinions is an Art.
Charles McCabe (1856 - ), San Francisco Chronicle

-----------------------------------------------------
I have a new to me Heath QRP combo. The PSA-9 power supply has one
resistor in
it and it is fried. I would appreciate it if someone with a manual could
look
up the resistance/wattage of the resistor in the power supply