Help: SyntorX VCO Mod
 

Hi
I have a Syntor X its a T83
Has 9 pads on tx and rx in the VCO.
First 6 pads on the rx and tx were connected and the last 3 on both
rx and tx were not connected to the 6.
Anyway the radio will not not tx on 145 I connected all the pads on tx
and rx still no tx, But if I put in the old module it tx fine.
Can someone tell me what pads need to be connected for tx, Thats all I
care about.
Want to use it as tx only.
Thanks and any help would be great.
Rich