RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Swap (https://www.radiobanter.com/swap/)
-   -   FS: HARRIS HF AMP & AUTO-TUNER (https://www.radiobanter.com/swap/60975-fs-harris-hf-amp-auto-tuner.html)

AL G. November 11th 04 03:23 PM

FS: HARRIS HF AMP & AUTO-TUNER
 
RF-355 500w CCS output, 1.6-29.9 mhz (auto or manual band switched), 3CX800
powered, owned by retired Harris engineer, requires 50 ohm antenna, only
tunes via 'L' adjust (no C load, u can use ext tuner), has internal watt /
vswr meter and various front panel indicators and controls, works "auto"
band change with RF-350K xcvr, will work 'manual' tune via internal motor
driven tuning with any 30-40w drive xcvr for typical output 600w (owner
might consider bypass Tx Gain Cntrl for more power), have several pix to
forward, is clean w/ no dings-scratches etc, w/ Manual. $800.
CU-2310 "Remote" mounted auto-tuner, is a match for the RF-355 PA & RF-350K
xcvr, handles 600w + watts, tested /working, uses vac var and lotsa digital
control BUT can be fooled to work with any xcvr or PA, I have digi pix.
$300. W/ manual.
Also have an 18ft control cable--think is Xcvr to PA (have to check as might
be PA to CU-2310 Tuner).
All = $900. b/o + ship costs from WNY or a reasonable meet 200-300miles.
(owner moving, needs a sale).
Will only sell to licensed Ham or Comm. Co. or Group.



AL GOSS November 12th 04 02:07 AM

CU-2310 tuner spoken for al

"AL G." wrote in message
...
RF-355 500w CCS output, 1.6-29.9 mhz (auto or manual band switched),

3CX800
powered, owned by retired Harris engineer, requires 50 ohm antenna, only
tunes via 'L' adjust (no C load, u can use ext tuner), has internal watt /
vswr meter and various front panel indicators and controls, works "auto"
band change with RF-350K xcvr, will work 'manual' tune via internal motor
driven tuning with any 30-40w drive xcvr for typical output 600w (owner
might consider bypass Tx Gain Cntrl for more power), have several pix to
forward, is clean w/ no dings-scratches etc, w/ Manual. $800.
CU-2310 "Remote" mounted auto-tuner, is a match for the RF-355 PA &

RF-350K
xcvr, handles 600w + watts, tested /working, uses vac var and lotsa

digital
control BUT can be fooled to work with any xcvr or PA, I have digi pix.
$300. W/ manual.
Also have an 18ft control cable--think is Xcvr to PA (have to check as

might
be PA to CU-2310 Tuner).
All = $900. b/o + ship costs from WNY or a reasonable meet 200-300miles.
(owner moving, needs a sale).
Will only sell to licensed Ham or Comm. Co. or Group.






All times are GMT +1. The time now is 08:01 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com