![]() |
Motorola Starpoint
Hello,
Anybody here used products from the Motorola Starpoint familiy? At which distance (point A-------B) you used them, frequency, and finally what is your opinion about those products? Thanks, Dusan Sukovic |
Motorola Starpoint
check out
http://batboard.batlabs.com you'll need to sign up for a free account. these guys will be able to answer any questions related to motorola :) -- Thank You, Rev. Robert P. Chrysafis Universal Life Church (ULC) http://www.ulc.org Moderator HunterdonFree |
Motorola Starpoint
Thanks a bunch. :-)
Phantom skrev: check out http://batboard.batlabs.com you'll need to sign up for a free account. these guys will be able to answer any questions related to motorola :) -- Thank You, Rev. Robert P. Chrysafis Universal Life Church (ULC) http://www.ulc.org Moderator HunterdonFree |
Motorola Starpoint
Be careful on using this used Starpoint equipment...isn't cheap now but, it
is not licensable in the US any more and is now in the PCS cellular bands. I always had hopes of converting them to the 2.4 GHz ham band but never have done it yet... The erumpent was quite reliable. Lou wrote in message ups.com... Hello, Anybody here used products from the Motorola Starpoint familiy? At which distance (point A-------B) you used them, frequency, and finally what is your opinion about those products? Thanks, Dusan Sukovic |
Motorola Starpoint
Good stuff.
But that is beside the point. You need to have someone determine the characteristics of your intended path. Then decide what frequency bands will be appropriate. Then find out what frequencies are already in use along that path. Higher frequency = smaller dish = lower noise = less ultimate range. Other factors along the path affect propagation at various frequencies and thus path reliability. Paths are usually 200 mi or less depending on many factors. Better to lease whatever bandwidth you need from existing carriers. Unless none is available. Unless you are a Ham DX hound (I don't think mux is legal though) Starpoint was available in various configurations and frequencies and power levels. Because microwave is largely dependant on line-of-site, locations of the end points is everything. Better to know what you need before coming up short on and have to buy a needed item at the sellers price. My experience on it is 10 years old though. It is usually pulled from service because of rule changes, site costs, or replaced by fiber for much more bandwidth. Some are still in place for backup in case of phone company T1 failure. Jim, ac6tk http://techinfo.awardspaces.com wrote in message ups.com... Hello, Anybody here used products from the Motorola Starpoint familiy? At which distance (point A-------B) you used them, frequency, and finally what is your opinion about those products? Thanks, Dusan Sukovic |
All times are GMT +1. The time now is 09:20 AM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com