Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Need wire identification for Alliance Rotor motor
I have a scan of a U-100 schematic. E-mail me and I'll send it to you.
73 de Glenn AA5PK wrote in message ... This is the common alliance rotor that was used forever on tv antennas, called the Tenna Rotor. I cant find a model # on it. Anyhow, there are 4 wire terminals, labelled 1 thru 4. I am trying to find out what each does. From what I know, one would be ground, one POS Left, one POS Right, the other sends the direction back to the control. I'm trying to rig a different brand of control the motor but need to know what is what on the motor wiring. Please post this info if you know it. Thanks George |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Need wire identification for Alliance Rotor motor | Equipment | |||
Question is 'it' a Longwire {Random Wire} Antenna -or- Inverted "L" Antenna ? | Shortwave | |||
Is this voltage doubler different? | Homebrew | |||
Two Shortwave Listener (SWL) 10:1 Baluns for Random Wire Antennas | Swap | |||
RF filters and Impedance Matching | Homebrew |