Newbie TV rotator question, wiring
I have a channel master rotator control, sticker on back says model 9513,
the model on the case says 72211.
Can someone tell me what the 3 wires due, like are the gound, hot , neutral.
the roatotor motor at the antenna has different wire codes to the piece at
the control.
dont want to wire it up and fry it.
the control has number 1 to 3 at the terminals. its 25 V 1.5 amp output.
Rotor motor at antenna has other color coded wires, previous owner used a
seperate piece of wire with different wires. Inside the box its numbered 1
to 3 also, but the rotator motor and controller are suppose to be different.
On the controller the number 1 terminal is off to one side,
In the rotor motor Number 1 tab has a black wire going to it and 2 and 3
have yellow wires coming off the motor field(coils) it looks like.
|