Lex-Lutor wrote:
[ RRB Moderator's Note: I'm not sure how on-topic this is for rec.radio.
broadcasting, but I'm letting the post go through to RRB anyhow. Any
complaints from RRB or Airwaves Digest readers may be sent directly to me. ]


What is the best way to put silver coat on home made PCB-s or small Copper
pipes inside and outside ??



Thanks for help.




You can buy a chemical compound from www.partsexpress.com that you just
mix up and put your board into for tin plating. You don`t want silver
plating as the other fellow told you as it would tarnish. Rob