I did with the DSP6000 on a TFT STL...make sure the rcvr is wide enough
to handle the B/W....otherwise you have RF level but poor or NO demod on
the DSP boxes....(Moseley's are wider in the IF to allow this)...
(Dave Chance at Moseley put me onto that!)
If you are careful with them, they work ok....just don't run PROCESSED
audio over them (light leveling is ok..but put the processor AFTER
the DSP boxes)

Chris
Houston

Eric C. Weaver wrote:

Has anyone tried running a Mosely DSP-6000 STL modem pair over a Bext (Italian
import) STL or other non-Mosely RF chain? How'd it go?


--
Remove NOSPAM for direct reply!