View Single Post
  #8   Report Post  
Old June 15th 04, 10:49 PM
David Eduardo
 
Posts: n/a
Default


"R J Carpenter" wrote in message
...

"David Eduardo" wrote in message
...

I was talking about listinening in Monterrey Park, right in the main

lobe.

My maps show Monterey Park to be off to the north of the KTNQ peak.


Monterrey Park is right in the major lobe on the KTNQ pattern, about 8 miles
W by NW of the Industry site; the ERP there is in the vicinity of 100 to 125
kw, depending on where in Monterrey Park you are. It may be less than
towards Huntington Park, but far more than a non-DA 50 kw operation.

I'd
guess down to the half-power point on the pattern, or lower. Pattern peak
direction abt 245 deg, direction to Monterey Park abt 290 deg. In any

case,
30kHz spacing shouldn't be a severe test.


With the IE station about 45 miles away, I'd say it is a decent test. In
fact, 1050 in that area is usually a mix of XED and the IE station.