View Single Post
  #4   Report Post  
Old July 25th 03, 05:17 PM
Dwight Stewart
 
Posts: n/a
Default

"Keith" wrote:

Dwight, There is no way for anyone to know if
a tech license has passed a morse code test
and all techs have voice privileges for 28.3-
28.5 MHz. What is the FCC going to do run
around and check every tech license holder?
Besides would you rather give up ten meters
to truckers and CBers?



I would not do what you're seeking even if there was absolutely no chance
at all for the FCC to catch me. When I joined the Amateur Radio community, I
made a commitment to abide by the rules and regulations associated with it.
That commitment is not based on the FCC's enforcement ability, but my own
sense of what is good for this community. I personally benefit from a
community that has an equal commitment to abide by the rules and
regulations. I therefore would not do anything to upset that situation.

I suspect you will eventually find that most other Technician license
holders have a similar commitment to abide by the rules and regulation.

By the way, your statement that "all techs have voice privileges for
28.3-28.5 MHz" is simply not true - only a Technician Plus license holder (a
Tech who has also passed the 5wpm code test) is allowed to operate on those
frequencies.


Dwight Stewart (W5NET)

http://www.qsl.net/w5net/