How long is that antenna? (X-Terminator)

Starting from the base..................

9.5 inches of 1/2 inch chrome plated brass.

Then a 9 turn coil 7.5 inches long by 2.625 inches in outside
diameter.

Then 3.75 inches of 1/2 inch chrome plated brass.

Then the second coil of 5 turns, 4.5 inches long by 2.625 inches in
outside diameter.

Then 5.5 inches of 1/2 inch chrome plated brass.

Then the stinger of Stainless steel. 32 inches by 3/32 of an inch.

The coils are 5/16 inch chrome plated tubing.

Total length = 62.75 inches

Snip
If you can't figure out the ID by
the info I gave then you are the one that doesn't have a clue.


You didn't give the correct info face the facts. How do you figure the id
when no wire guage is given? Either way you have no idea what the coil
does then if your giving him it in length, plain and simple.
Snip

I'm not even going to bother responding to most of your post. You have
confirmed your confusion by the above comment. Should I spell it out
for you?

The ID is figureable by the dimensions I gave. Just as I said it was.

Given info.................OD= 2.625
Given info................The coils is made of 5/16 tubing.

ID = OD - 2 x 5/16 Duhhhhhhhhhhhh

ID = 2.625 - 10/16

ID = 2.625 - .625

ID = 2

Duhhhhhhhh again