Check the AM power regulator, the predriver, driver, and final in the
rig. One of them is most likely shot. If it's not one of those, check
for heat failure of the capacitors in the xmit circuit.

Of course, your best bet would be to get rid of that Galaxy junk and
get a real CB, such as a Uniden.

-SSB

wrote:

hey group
i have a galaxy that is driving me crazy,,its a 33 hml
it transmits fine for a few minutes
talkback audio is good
then during transmit they say i sound choppy
about this time,,receive goes choppy
if you continue to use it in hopes it gets better
it appears not to key up
as the meter does not move,,and folks cant hear you at all
keying the mic does allow audio through the talkback
but no transmit
any idea's folks
i have been over the solder joints numerous times
and am convinced they are good
unsoldered and re-soldered all questionable ones
seems to be more of a problem with use
such as a component heats up and fails
thanks for any advice
don