George wrote:

What's the best reference source I can use for designing loads in UHF
antenna elements? (To make physically shortened elements electrically
full-size.) For example, 200 ohms reactive at 500 MHz with Q 75-100?

Thanks.

George K6GW

Just curious, George! Because antennas at that frequency are relatively
small to begin with, I've never considered loading anything like that. I'm curious
as to why you would want to -- there must be a good reason, isn't there?

Irv VE6BP
--
--------------------------------------
Diagnosed Type II Diabetes March 5 2001
Beating it with diet and exercise!
297/215/210 (to be revised lower)
58"/43"(!)/44" (already lower too!)
--------------------------------------
Visit my HomePage at http://members.shaw.ca/finkirv/
Visit my very special website at http://members.shaw.ca/finkirv4/
Visit my CFSRS/CFIOG ONLINE OLDTIMERS website at http://members.shaw.ca/finkirv5/
--------------------
Irv Finkleman,
Grampa/Ex-Navy/Old Fart/Ham Radio VE6BP
Calgary, Alberta, Canada