Jeremy Becnel wrote:
My mistake, I should've included the url for said plans.
http://members.aol.com/k5oejerry/vhf_vert.htm
The reason I'm wanting to go with the steel is for durability versus the
builder's 10 gauge copper wire. I seem to enjoy taking a simple design and
making it more 'pretty' for lack of a better term.
Jeremy
KC5TEK
The requirement for the radials in the case shown at
the URL is because the antenna is elevated and
designed for hitting satellites. For normal low angle radiation a simple
magmount using the vehicle body as a groundplane would work.
--
--------------------------------------
Diagnosed Type II Diabetes March 5 2001
Beating it with diet and exercise!
297/215/210 (to be revised lower)
58"/43"(!)/44" (already lower too!)
--------------------------------------
Visit my HomePage at
http://members.shaw.ca/finkirv/
Visit my Baby Sofia website at
http://members.shaw.ca/finkirv4/
Visit my OLDTIMERS website at
http://members.shaw.ca/finkirv5/
--------------------
Irv Finkleman,
Grampa/Ex-Navy/Old Fart/Ham Radio VE6BP
Calgary, Alberta, Canada