"Bill Lowry" wrote in message
news:AK8nd.13040$pP5.8680@trnddc05...
When I read your response I said, "Oh no". I was thinking that I had mad
an
expensive mistake. However, it is an ESP2. I am glad it was just a typing
mistake instead a purchase mistake. (g)

I soldered a diode into the B position and started twisting the dial.
Every
time I started from, say channel 1, the next time I rotated the dial to
channel 1 again I was still on the normal channel 1.

Got any Ideas?

Bill



"DR. Death" wrote in message
...
"Bill Lowry" wrote in message
news:b2dmd.3442$J55.1562@trnddc06...
Has anyone performed the Frequency Mod as outlined on the CBTricks web
site.
I performed the mod as shown there but I can twist the Channel knob
until
I
wear it out and it still only works on the Normal channels. I hate to
get
beat when all that has to be done is to add one diode. (g)

Bill

http://www.cbtricks.com/ .........and go to radio
info..........Midland............77-255ESP



You listed your model as 77-255ESP, cbtricks mod is for the 77-255ESP2
model.




Another thought, test the diode, maybe it's bad or was damaged on install.