"Tim ODonnell" wrote in message ...

ok so how do I get rid of it....there has got to be a way! I cant
believe RS would build such a piece of equipment that would do that?

Bryan



I found this to be true only when monitoring EDACS systems the MOT
systems
do not seem to be affected. I gotta tell ya that static is awful.

Tim

"FAE LLV#11" wrote in message
m...
"Frank" wrote in message
news:01c3b01f$74f4c960$0125250a@locdgizlysgbksrm ...
FAE LLV#11 .. .

^ I have Elsinore area programmed in and the control channel
^ pops up at different times with a lot of static. I expect it
^ is when they transmit to the MDT.

MDT/MDC data is transmitted on the other frequencies the same as voice
is but
the radio doesn't normally send it to audio. MDT/MDC data is not
transmitted
on the control channel so you would either be hearing control data on
the
control channel or MDT/MDC data on a data channel.


^ Is there a way to keep it quiet?

I found out what the static is......The pro95 doesn't like to use the
priority channel when there is trunk tracking involved. I found this
info on another website. I like to listen to fire dispatch as my
priority but also like to listen to the SO on 800. Would like to find
a way around the static to listen to both.

Bryan



You shouldn't be getting that noise and I don't know what it is so I
can't
answer.

Try entering one of the other subsystems in another bank. Hopefully,
with the
experience you gain by entering the second subsystem, this will help you
figure out what is wrong.

It is worth it to make or buy a serial interface for the radio and to
download the freeware program that Don Starr wrote (WIN93.EXE).

Frank