I won't "worry about it," as long as you refrain from posting absolute
statements about this that are demonstrably untrue.

- RF


"Reg Edwards" wrote in message
...

Your math example does not illustrate the reality that the
impedance
change produced by a ~5/8" OD brass pin inserted radially into the
dielectric space of coaxial transmission line can match that line into
an
adjacent termination of fairly high SWR (1.3:1 or so), at frequencies
as
low as 54MHz.

=============================

It's not intended to.

But I'm sure you are right. Try not to worry about it.