View Single Post
  #1   Report Post  
Old January 19th 05, 01:46 AM
SideBand
 
Posts: n/a
Default

itoldyouiamnotiamnotgeorge wrote:
SideBand wrote in news:jqhHd.16384$_X7.6881
@newssvr33.news.prodigy.com:


itoldyouiamnotiamnotgeorge wrote:


Tone Squelch -Is a generic name for many "Sub-audible tone systems".


Don't you mean CTCSS?





No


Tone Squelch -Is a generic name for many "Sub-audible tone systems". The
principle is that a receiver will not allow any audio to be routed to the
speaker unless it is accompanied by the appropriate sub-audible tone.
(Also see: CTCSS, ETS & PL)

CTCSS - "Continuous Tone Coded Squelch System" CTCSS is a series of
sub-audible tones which are standard on most new radios. An audible
cousin
of CTCSS is DTMF. These tones often perform control functions. Some
repeaters may require a sub-audible tone before activating, others use it
to perform functions such as turning all trunks on and off when a
specific tone is present. (Also see: Tone Squelch, ETS & PL)

ETS - "Electronic Tone Squelch" is the Canadian Marconi Company version
of
tone squelch. ETS is a series of sub-audible tones which has the ability
of performing control functions. (Also see, Tone Squelch, CTCSS & PL.)


Do I need to point it out? Am I the only one that sees it?

According to your first "definition" up there, Sub-Audible Tone System
(SATS) = CTCSS = PL.

In fact, all of my ICOM and Alinco manuals equate PL with CTCSS and
define them with the same definition you attribute to SATS.

Or were you confusing CTCSS with DTS?