Is anyone familiar at all with MFJ tuners? Mine is a 941B.. It has a
little red button just above the RF/SWR meter.. Do I need to push this
in to get the SWR reading? When I hold it down and play with the
knobs I am able to get good SWR, but if I don't hold it down, the SWR
never gets below 3. There is also another dial that says SWR/WATT
that can be pushed in or pulled out.. The online version of the
manual talks about pulling and pusing this dial but never mentions the
little red button.

I tried hooking another SWR meter up between the xcvr and tuner and
the reading is similar to what I see on the tuner when I press the red
button but not exactly the same.

Thanks,

Dan H.