Hiya....

The very beginning of the receiving wire is attached directly to the
ICE-180.

The part of the diagram that is creating the question about the exact path
the receiving wire takes has to do with how the wire gets wrapped around the
very center of the top of the stone chimney and then directed to another
corner of the roof.

The receiving wire starts at the tap on the ICE-180 which is on the roof at
the bottom of the chimney. From there, it goes straight up three feet to
the top of the chimney. There it is wrapped around the top of the chimney
once and leads to the first corner of the roof. From the corner of the
roof, it feeds through the securing nylon tie that is secured to the gutter,
and then goes back on itself to the chimney. At the chimney, it's wrapped
around once more and heads to the second corner of the roof. From the
second corner, it's again fed through the securing nylon tie and then back
to the chimney. This is repeated for the other two corners of the roof.
The final return of the receiving wire to the chimney is wrapped around once
at the chimney to secure it and then terminated to an insulator. If you
look at the top of the chimney, although each "wrap-around" is of equal
length and shape, it appears as if there is a small coil of wire around the
top of the chimney.

--
Respectfully,

Michael

Home Page: http://md_dxing.tripod.com/
Northern NJ
R75 w/DSP, Kiwa agc/sync & audio mods
G5RV & 200ft longwire w/ICE-180
MFJ-1048 preselector
SoundBlstr Live PC card w/five piece Cambridge
speakers & full software mixer/eq.

"starman" wrote in message
...
Michael wrote:

Hiya...

One of my two antennas is a home brew 200 ft random wire antenna. It's
well
grounded and also makes use of a coax feed and an ICE-180 matching
transformer. Most importantly, it's set up and folded more like a piece
of
modern art rather then an antenna :-).

Where's the connection from the antenna to the matching transformer? I
see the end of the wire connected to an insulator on the chimney but
where's the other end (beginning) of the antenna wire that should be
connected to the ICE-180? Also, if the antenna wire is a 200-ft
continuous length, I don't see what path it takes to make the 'X'
pattern. It looks like two seperate doubled wires crossing over the
chimney top but not part of a continuous length of wire. It would be
helpful if you added some arrows to show the path of the wire as you
constructed it.


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----