ELFA,
OK I will bite; here are a few questions:
Is this going to be a stand-a-lone 'external' AM/MW Ferrite Rod
Antenna (FRA) to be used with any radio/receiver ?
- These usually have a single winding and variable tuning capacitor.
- - They can be used by 'inductively coupling' them to Radios with a
built-in AM/MW FRA.
- - - They can be used by 'direct connection' to Receivers with
External Antenna Inputs (that lack a AM/MW FRA).
NOTE: Sometimes they are built with a 'connection' for an External
Antenna, and are used to 'couple' and 'tune' this External Antenna for
the AM/MW Band.
Or, is this going to be a unique 'internal' AM/MW Ferrite Rod Antenna
to be used as a 'replacement' for the existing FRA in a radio/receiver
that you already have ?
- Most of the time these have two windings and you will have to
closely examine the original FRA to determine your physical starting
points to build your replacement FRA for this specific radio/receiver.
WINDINGS:
- Number Windings both Primary and Secondary of the FRA.
- - Position of both sets of Windings on the FRA.
- - - Then you must start the trial and error process of
getting-it-right for that radio/receiver.
iane ~ RHF
..
..
= = = elfa
= = = wrote in message ...
In article , RHF says...
ELFA,
I suggest that you first consider using a simple Box Loop Antenna.
Appreciate the suggestion RHF, but this is for an electronic education I'm
trying to give myself. All I want to do is make a ferrite antenna myself to see
if I can actually do it.
elfa
Check-Out the "Loop Antennas" eGroup on YAHOO !
- - - http://groups.yahoo.com/group/loopantennas/
Also the new "Ferrite Rod Antenna Experimenters" eGroup on YAHOO !
- - - http://groups.yahoo.com/group/FerriteRodAntenna/
~ RHF
.
.
= = = elfa
= = = wrote in message ...
I want to try to make a homemade ferrite antenna to improve the AM reception on
an old radio. I can't find any place on the internet that gives a simple
explanation of the how to's. All I want to know is how many winds of copper
wire and what lead connects to what radio connection. And also, just the most
basic of antenna principals involved.
Anyone have any suggestions?
thanks
elfa