View Single Post
  #9   Report Post  
Old November 14th 03, 03:59 AM
Gray Shockley
 
Posts: n/a
Default

On Thu, 13 Nov 2003 21:35:20 -0600, tommyknocker wrote
(in message ):

Stinger wrote:

Our local Sam's Club has APC 1100's for $89.00. They're capable of
protecting a LOT of equipment, but overkill for just one radio.


I'm not a member. This particular surge protector is hooked to all my
computer equipment plus a clock, a shredder and a phone.



A shredder?


I can't cite anyone else but I sure wouldn't hook something with a motor up
to the same serge suppresser to which I have computer and phone equipment.



Gray Shockley
-----------------------
DX-392 DX-398
RX-320 DX-399
CCradio w/RS Loop
Torus Tuner (3-13 MHz)
Select-A-Tenna
-----------------------
Vicksburg, MS US








I have a
cheapie surge protector that's hooked solely to my Yaesu; I use the
switch to turn off the power when I'm not using it since the chips are
real sensitive to power fluctuations.


-- Stinger
"tommyknocker" wrote in message
...
Llgpt wrote:

Subject: Source of mysterious noise FOUND!
From: tommyknocker
Date: 11/13/2003 6:26 PM Central Standard Time
Message-id:

I finally got off my fat ass and decided to locate the source of the
data-sounding signal blocking my HF reception. A quick tour of the
premises with my DX398 revealed that the noise was only present in the
computer room/ham shack (yeah, my luck). But unplugging the computer

and
peripherals didn't help. So I turned off the VERY EXPENSIVE surge
protector that the computer plugs in to, and the noise went away. Turn
the surge protector back on, and the noise starts up again. I don't

want
to shell out the $$$ for a new surge protector, so I'll just have to
turn it off when I listen/DX. But why wasn't it doing it prior to about
two months ago? Maybe I should buy another one...




It more than likely took a hit (surge) and something inside fried/died.

I had a
new in the box top of the line Tripp Lite fail upon opening it and

plugging it
in for the first time. Turned out to be a faulty solder joint. Quick

repair and
has worked for several years since.

Guess it's off to Fry's (electronics store) in the morning to buy a new
one. Mine's a Belkin and I've had it for about a year, but it's only
been doing this for a little under two months apparently.




Les Locklear
Gulfport, Ms.