View Single Post
  #3   Report Post  
Old December 1st 03, 10:55 PM
Soames123
 
Posts: n/a
Default

Some parts will melt if above 212 F or so;
- Did id drop into SALT water?
If so, take out the batteries & put it into
fresh warer. Soak it good.
THEN take it out, open up the case ( Broke anyway !)
& let it sit in a warm, dry place, with a
(~) 60 watt light bulb shining on it
Set a fan right next to it.
Turn it over every 4 hours.
Do this for a day..

Look for signs of moisture.
Then put in FRESH batteries & try it.
- Might work !!!



Subject: ATS 606 - Siemens RK 759
From: "Miha Rus"
Date: 12/1/2003 4:16 PM Eastern Standard Time
Message-id:

My radio has been exposed to moisture on my trip to Canada. It hasn't worked
well since. It is operating OK, only that the command tend not to respond to
pressure. I do not dare to open the set while I have been told it's quite
intricate a thing. I can see small water drops on the internal side of the
display window. It seems that after been put into warm on on the very top
position some water has apparently evaporated. Does anybody has an idea?

73,

Miha Rus, Log pri Brezovici