MY SCUBA camera started flooding ; come back up
& see water inside it;
Flash wouldnt work nobbut

- took it apart, cleaned up the salt water, wiped it down with Fresh Water,
let it dry in the Sun 24 Hrs;

- Worked Fine.


In article ,
(Soames123) writes:

Some parts will melt if above 212 F or so;
- Did it drop into SALT water?
If so, take out the batteries & put it into
fresh water. Soak it good.
THEN take it out, open up the case ( Broke anyway !)
& let it sit in a warm, dry place, with a
(~) 60 watt light bulb shining on it
Set a fan right next to it.
Turn it over every 4 hours.
Do this for a day..

Look for signs of moisture.
Then put in FRESH batteries & try it.
- Might work !!!