That's pretty much what they give you. It is a two conductor unshielded
wire, with a 1/8 inch plug on one end, and stripped wires on the other end.
One of the 4 antennas I bought didn't have the cable, but at 10 dollars, I
bought it anyway.

Pete

Ron Hardin wrote in message
...
LHogan5782 wrote:

i came across one of the antennas with no wires to attach to a radio,
can
someone tell me the catalog number or any info for the cabe that came
with this
loop to attach it to a receiver?

thanks

It doesn't need to attach to most radios, just set it alongside. It's an
impedance
matcher to the loopstick inside the radio, forming a transformer.

If you don't have a loopstick inside, run any old 3.5mm audio cable
(probably) to
the antenna terminals on the radio, for which probably you will have to
adapt the cable
but perhaps not at the radio end. 3.5mm monaural is a good guess (as
opposed to stereo).
--
Ron Hardin


On the internet, nobody knows you're a jerk.