Pete KE9OA wrote:

That's a definite for sure. I've got all of the RF design done; I am just
waiting for our software person to be freed up, so he can write all of the
control/display code. I've gotten the overload point up to 140mV, and it
handles all of the signals in the Chicago area with not overload, when using
a 100 foot antenna.
For the past couple of weeks, I have been learning a new software package
called Protel DXP. I've just started creating all of the library symbols in
the past couple of days. After this happens, I will transfer the design over
to Protel.
I was hoping to have this radio hit the market this month, but we have a 3
million dollar project that has a higher priority.
I still need to work out the mechanical details for the packaging,
especially for the loop antenna.
Another project I have completed this month is a DDS based signal generator,
with AM capabilities. The boss was impressed with the design, so I think
(hope) that we will be marketing this item. Coverage is from 1kHz to 30MHz,
although that can be increased to 60MHz. It will have both keypad entry
shaft encoder for frequency.

Pete

Does it look like you're company might market a stand alone version of
the sync' detector in your MW receiver? If not, can we build our own
from your plans?

BTW- I'm looking for some PIN diodes for my R8B. It looks like some of
them in the front-end bandpass filters might have been damaged or become
leaky. This also happened to my SW8 several years ago while it was still
under warranty. Drake did the repair. What do you suggest for a good
PIN?

Thanks


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----