Micronta 21-525B. Reading the instructions from the web and it says "Push
transmit button and rotate the calibration control until the meters needle
aligns with the Cal mark"
The problem is the CAL mark is 1" wide , sorta like this, on the right side
of the meter.
|_______|
cal
Do you adjust to the beginning of the area, middle or far right where the
CAL is printed? The entire CAL area is in red.
Thanks!
--
Jim Douglas
http:\\
www.genesis-software.com
Latitude 32.5818
Longitude -96.5412
Elevation 497