Thanks for the quick response. I was afraid of that answer and the rest of
the calibration is way off if I set it to the far right! Back to work I go!
Thanks again!


"dxAce" wrote in message
...


Jim Douglas wrote:

Micronta 21-525B. Reading the instructions from the web and it says
"Push
transmit button and rotate the calibration control until the meters
needle
aligns with the Cal mark"

The problem is the CAL mark is 1" wide , sorta like this, on the right
side
of the meter.

|_______|
cal

Do you adjust to the beginning of the area, middle or far right where
the
CAL is printed? The entire CAL area is in red.

My guess is all the way to the CAL mark... I seem to remember having one
of
those.

dxAce