On Wed, 06 Oct 2004 12:20:57 -0500, Cecil Moore
wrote:
Tom Bruhns wrote:
Any of the methods mentioned by Ian and myself will work well, and all
are reasonably easy to implement with a bit of practice and patience.
One method of "etching" that worked for me was using a reamer
bit on a drill press to cut through the copper and barely into
the PCB material. This has the advantage of leaving a ground
plane in between the active traces. Also great for scouring
and sizing PCBs.
This is where those Dremmel tools come into their own!
--
"What is now proved was once only imagin'd." - William Blake, 1793.
|