Well with your help I'm back in action. My 5000 has the dreaded keypad
bounce so using the computer is great. My new computer doesn't have a
serial port, I had to buy a usb serial adapter. Along with your
settings I had to uninstall the serial drivers and reinstall them again
and all is fine.

I haven't used the radio in quite a while so I was a little rusty.

Thanks again

Brian Hill wrote:



"Bob"
wrote in message news:dPRld.611567$8_6.552156@attbi_s04...
Thanks for the response. Yes it is on COM 1 but I forgot the
other port settings. Within the program you click TOOLS, OPTIONS,
PORT SETUP.

There are 5 adjustable settings in there. I remember I used to
have to change a couple of them for it to work but I forget which
ones AND what settings to choose.

Thanks again.

Ok. Let me give you mine. Maybe you can duplicate it and it will work?

Bit per sec. -4800
Data bits-8
Parity-None
Stop bits-1
Flow control-None


--
73 and good DXing.
Brian
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A lot of radios and 100' of rusty wire!
Zumbrota, Southern MN
Brian's Radio Universe
http://webpages.charter.net/brianhill/

EMAIL-
(Hide the $100 to reply!)