View Single Post
  #3   Report Post  
Old December 3rd 04, 06:56 AM
Jack Painter
 
Posts: n/a
Default


"Telamon" wrote
"digitania" wrote:

3) Can I then attach multiple antenna tuners to that single antenna

and
optimize each receiver's feed?


No. Most receivers have the same input impedance - about 50 ohms so you
would only need one tuner. The tuner resonates the antenna at some
frequency of interest.
--
Telamon
Ventura, California


Sorry there buddy, you are mistaken in that comment about resonating an
antenna. Tuners don't "resonate" anything, they simply fool a transmitter
into thinking it has a good impedance match. This is done between the tuner
and the transmitter only, even if ridiculous impedance and reactance
actually exists on several parts of the feedline and/or antenna. In that
case, the tuner will have to dissipate a lot of heat that the antenna system
throws back at it. When a receiver is connected to a tuner, the tuner
likewise simply balances the piece of line between itself and the receiver
and nothing else. This often improves reception, but it has no affect on the
antenna whatsoever.

Jack
Virginia Beach VA