"Roy Lewallen" wrote in message
...
Knarf wrote:

PS should I have used an actual helix? Very tedious to structure with
code, although have done it in other models. Noticed that the current in
and out of the coil is vastly different when compared with using the
lumped element model.

Most of the available implementations of NEC-2 include the ability to
generate a helix. Look for information on a 'GH' command.

Roy Lewallen, W7EL

Thanks for the info. Should have studied the NEC 2 manual more carefully.
It is on page 20 with no card picture.

Regards,

Frank