"nana" wrote in message
...

http://members.cox.net/kg0wx/


Turn your CRT monitor off and try again.

Also, check properties and look at the scan rate. It's what, 48.3KHz ?
(mine is at present) Tune up and down and you should hear it again every
48.3KHz throughout the spectrum. Or whatever your scan rate is.

Flat scren don't do this. The other solution is to move your antenas as
far from the computer as possible, but with most people's luck, you'll end
up closer to the neighbours computer.

Nana

Now that's a great idea! Mine was set to 60 so I moved it to 70 and
re-adjusted the screen. Bingo! No more interference.

Yes - I realise I just moved it to another spot but it was only noticable
on 60m. On 40 it's a non factor and I generally only operate on certain
160/80m freqs. It's not there, either.

Ken