Johann Höchtl wrote:
I built an "ugly" air wound balun on a PVC water pipe according to this
description
http://www.hamuniverse.com/balun.html
I get 24 turns on a pipe having 75mm (about 3 inches) diameter measured
outside.
But recently i had the chance to look up the section in the ARRL antenna
book and there the number of windings is considerably smaller at a
higher winding radius.
Which description is right? Or does either have advantages and drawbacks?
The optimum number of turns depends upon the band. Such a balun optimized
for 160m may not be effective on 10m and vice versa. OTOH, ferrite baluns
can be designed to function over a 10:1 frequency range by the proper
choice of the material for the toroid.
--
73, Cecil
http://www.qsl.net/w5dxp
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---