Cecil Moore wrote:

Reg Edwards wrote:

To clear away all misconceptions and confusion, try returning to
square one
and begin again with a clean slate.

dV/dz = -(R+j*Omega*L)*I

dI/dz = -(G+j*Omega*C)*V


Those are essentially the differential equations used by Ramo and
Whinnery to develop the following exponential equations for load
matched transmission lines (no reflections):

V = V+(e^-az)(e^-jbz)

I = V+(e^-az)(e^-jbz)/Z0

where 'a' is the attenuation factor. So why does an attenuated
voltage drop while a current, attenuated by exactly the same
percentage, doesn't drop?

Depends on whether 'a' is in series or in shunt.

73, ac6xg