"W9DMK (Robert Lay)" wrote in message
Dear Ken,

If I may be permitted another guess. When you check the bandwidth on
the higher bands, you probably do not see as much of an increase from
the original characterstics. If so, then there is another mechanism
that may have come into play. It does not take much of a droop on the
ends of a lower frequency antenna, center supported antenna to give an
effect of greater bandwidth. For example, I believe that you will
generally find that an inverted vee antenna has a wider bandwidth than
one that is near flat across the top (given that the center of each is
at same height above ground. If your antennas are center supported and
have a lower altitude at the ends than originally, that might account
for it. Unfortunately, your description of your antennas sounds more
like they are not center supported. As a general rule, as you surely
know, anything that increases the losses in an antenna will manifest
itself as greater bandwidth. That is the aspect that makes you really
want to find the cause, because it means something is eating your
watts.

With that I'm out of ideas.
Bob, W9DMK, Dahlgren, VA

Thanks for the ideas, Bob!

The antenna was never used on bands other than 40m before. Now,
it's my main antenna for use above 7mc. The only changes are the
addition of the tuner.

I know it's *not* the tuner because I've tested it with the tuner physically
out of line.

There are 2 other miniscule changes. Before the storm, I had trimmed
out the ends with 18g insulated speaker wire. Each leg had a butt splice
then about 2' of the stuff. Now the extra wire is standard 14g stranded
bare copper, soldered in place.

The feedline had 1 minor change, too. From the tuner I had 20' of rg58
going into a 9 turn, 5-1/4" dia air coil then 50' of 450 ohm ladder line.

The coil was wound on a CD-rom package with the turns held together
with superglue. The form was removed after the glue set up. Neat.

During the repairs, 1 turn of the coil broke loose and straightned out on
the side connected to the 20' of rg58 going indoors. The coil is 1 piece
still, just 1 turn less on the coax side.

The antenna is basically a flat dipole, supported by a wooden roof in
the middle and rope at the ends. The ends droop maybe 2-3 feet.

I suppose the replacement of the end wire with heavier wire could help
b/w but I wouldn't think that much.

I just checked my 160/80m dipole, where nothing changed so I don't
think it's the radio or the tuner......

Thanks for scratching your brain for me!

--
73's es gd dx de Ken KG0WX
Grid EM17ip, Flying Pigs #1055,
List Owner, Yahoo! E-groups:
VX-2R & FT-857