Thread: SSB in DX-398
View Single Post
  #19   Report Post  
Old January 22nd 05, 11:49 PM
Gary Brown
 
Posts: n/a
Default

Used select text in Acrobat Reader to copy text from a pdf file...

When you have located an SSB

station, press AM MODE to receive

the transmission. Repeatedly

press AM MODE to switch between

USB or LSB transmissions (try

LSB for frequencies below 10

MHz or USB for frequencies

above 10 MHz).

4. Set STEP to SLOW then readjust

MANUAL TUNING for maximum

intelligibility.



Gary K4GPB

"Scott A." wrote in message
...
I have a Radio Shack DX-398 that I bought in '97 or '98. Whenever I try to
listen to anything in either usb or lsb, it sounds sort of like the
chipmunks. The pitch just sounds wrong and unintelligable.

I don't have a lot of experience with swl, so I don't know if this is
normal or not. I would expect normal AM broadcasts to be distorted, but
signals that I'm sure are ssb also sound bad.

(This problem comes to mind now because I was attempting to pick up the
pirate broadcast on 6925 mentioned on this newsgroup just a few minutes
ago, which I'm pretty sure is usb. I can pick it up. I even recognized
the old David Crosby song they were playing. But it's still un-
intelligable.)