Richard wrote:

I need help with a project.

I have a tower site where there is a existing UHF antenna 200 Ft on hard
line mounted and existing. (460.0 mhz)

Is there a device to retune the antenna to GMRS to go on the back of the
radio to retune the load?

Would a combiner help?



It's unlikely this will be an issue. Most commercial antennas in this
range are cut +/- 10 MHz. Depending on the size of the hardline, you
may not be able to measure any reflected power. I'd just put it and
measure the return loss and expect no problems.

--
http://www.rich.osman.com
Rich Osman; POB 93167; Southlake, TX 76092 (Near DFW Airport) ARS: N1OZ

If you receive something that says "Send this to everyone you know,"
PLEASE pretend you don't know me.