View Single Post
  #17   Report Post  
Old January 26th 05, 12:42 PM
Doug Adair
 
Posts: n/a
Default

Well now you learned something handcock faggot. Go
slurp more cum at the truckstop ya limpwristed
sissy.




On Wed, 26 Jan 2005 00:40:40 GMT, "Trent Hancock"
wrote:

My problem with the whole mess was this: I had no idea this was an all text,
no binary format news group. No where was this written or explained. Another
fact is: there are other pics listed in this group, but no nasty messages
posted to them.

As it appeared to me at the time, I had invaded a good old boys plot of turf
and was being told I was not welcome. I have been a user of the Usenet
system for years and have never been treated as I have been on this net.
Does not say much for the users of this group. I left chicken band in the
early 90's to escape the rude ill mannered people that were there and became
a ham due to what I heard on the bands. People talked with each other and
did not use foul language and call names and were polite. That is why I came
to the group to try and get some information on a piece of equipment. The
first response was a "YOU DID A NO-NO". What was written you may call
polite, but I beg to differ. The Usenet is just that, a Usenet. It is for
all of us to use and not for a select few to control.

On another note, I did open it up and it uses Motorola chips which I can not
cross. The dates on the chips are 1970 and it appears to operate off 15
volts using two 7 1/2 volt batteries. I did get it to operating and it seems
to work well on my Drake TR-4 and my SB-401. Got good reports and much
better PEP with little clipping.

Thanks for the help and I am sorry for blowing off some steam, but I am the
type of person, that when jumped at with no explanation, will jump back. If
I do something wrong, tell me what I did wrong and ask me not to do it
again. Go the other way and I can get very hard headed. I don't take kindly
to being TOLD what I will do.

Trent
wrote in message
roups.com...

Ed Price wrote:
"Trent Hancock" wrote in message
news Perfect sense sir. Neither use tubes, but are considered boat

anchors. If
the use of tubes were the only determining factor as to if it was a

boat
anchor, then all currently mfgd. amplifiers are boat anchors. This

does
not
make sense.

Try putting a chute on the next time you jump and you will not land

as
hard.

Trent
KR4UW



Trent - your response to the first post, which was written in a polite
and helpful tone, nor your responses to subsequent posts, does not
motivate one to go out of the way to help you.

Nevertheless, as it appears that it's probably a homebrew unit, I
recommend you open the cover and see what chip(s) it uses, then do some
research to reverse-engineer it. I have several pieces of homebrew
equipment that you'd swear were factory made - but in the case of a
synthesized VFO, the fact that it was the subject of a QST article back
in the 1960s was the only thing that gave it away as a homebrew unit of
extraordinary quality.

Signetics made some compressor/compandor chips back in the 1970s and
1980s - IIRC the NE571 is one such IC.

Good luck and 73, John W3JN



_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account