Ian Jackson wrote:

Cecil Moore writes:
Not only will paralleling result in Z0=46 ohms but series'ing
them will result in Z0=186 ohms which will, for non-resonant
antennas, lower the I^2*R losses.

OK. I have just realised what you mean. Use two cables as 186 ohm
screened twin.
Sorrrry!

What I said was confusing. Sorry about that. What I meant was
that using twin runs of 93 ohm coax as parallel transmission
lines would result in lower losses than using a single run of
similar 50 ohm coax for non-resonant antennas. That was just an
observation, not an approach that I would recommend. Sorry
for the confusion.
--
73, Cecil http://www.qsl.net/w5dxp


----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---