"Jason" wrote
But why we can add or minus gain and IP3
which are in different unit (db and dbm)?
_______________
The algebraic summation of decibel values is a mathematically legitimate,
and convenient way to determine system performance. Decibels are based on
logarithms. Adding/subtracting logs or (decibels) is easier than
manipulating the real values they represent. The final dB value in an
analysis can be converted back to whatever units are desired.
For example, below is an analysis of a UHF radio link system over a
free-space path. The 5 watt power of the transmitter is first converted to
dBm so it can be used with other dB values present to analyze the system.
The same result is reached when multiplying tx power in watts by system
gains and losses expressed as decimal values, but that process is more
awkward -- at least when using a pencil & paper or a pocket calculator
(computers don't care).
TX PWR OUTPUT 36.99 dBm
TX ANT 19.20 dBi
RX ANT 19.20 dBi
TOTAL GAINS 75.39 dB
DISTANCE 18.00 Miles
FREQ 950.00 MHz
PATH LOSS 121.26 dB
LINE LOSS TX 1.80 dB
LINE LOSS RX 3.00 dB
CONN LOSS 1.00 dB
OTHER 0.00 dB
TOTAL LOSSES 127.06 dB
RX SIGNAL -51.67 dBm (584 uV)
RX SIGNAL REQ'D -90.00 dBm
RAW FADE MARGIN 38.33 dB
RF
Visit
http://rfry.org for FM transmission system papers.