View Single Post
  #11   Report Post  
Old February 7th 05, 02:02 AM
 
Posts: n/a
Default


wrote:

Must be one horridly poor yagi. Most 3 eleemnt designs are better
than 8dBi and with a little effort an be 1 db better than that.




8 dBi WITH a 180 degree pattern?
And WITH A F/B ratio that doesn't exceed 11 dB
or so?

I don't think so.



On 6 Feb 2005 14:10:37 -0800,
wrote:

How did you come to this conclusion? What
sort of field strength equipment did you use?


Simple testing with a stable RF power source and a sensitive field
strength meter in a very large yard. It's not hard to determine a

1Db
difference and a 3db one is easy.


What brand and model field strength meter
do you have? what sort of receive antenna did
you use? How did you do the conversion from
uV/meter to ERP?



The other is a colinear design the second element cannot contribute
3db unless the first didn''t radiate any energy. Thats rarely the
case.



????? How can the first not radiate any
engergy?


To get the gain you claim try a 8 or more segment colinear and
note that would be about 18-20ft tall for a 2m antenna.


According to most of what i have read,
every doubling of the sections give approximately
3 dB additional gain.



Again, i would be the first to say
that reality doesn't fit the math model,
sometimes not at all. But is this case,
you can really hear the difference.


Usually the math model is reality if its a real model. Often it's

not.
manyy of the simple shorthand models are far for accurate or

complete.


I used a program called Yagi Optimizer.

It should be close, it's not like
we are modeling active devices like FETs
and such!



Also in some locations there are third order factors not considered.
For a real model (NEC based) the stacked Jpole is 2.3-2.4dbi better
than a plain J and ends up at about 7.4Dbi. [In real terms that's
only about 2.4 DB better than a vertical dipole which a basic Jpole
is.]


Incorrect. A stacked J-pole cannot
be 2.4 dBi better than a plain J. It can only
be 2.4 dB better.


Anyways, You think a plain J-pole is 5 dBi?

Incorrect.



The
Jpole in this case is easier to evaluate because if the SWR is poor
it's definately not working well and a lot of things have to be
correct or the SWR will be poor.

For example, it may work better because its nearly 60inches taller

and
at a given location that could be the majik. Never ignore height as

a
significant factor at VHF.


Obviously. They are at about the same height,
considering the additional height of the Super J.



They work well to the designs limit if built carefully. I like them
for the ease of assembly of a rugged design that's reproduceable.


I would say that at VHF, a Super J is a
bit heavy and big, but the additional ERP
is worth it.


Slick