View Single Post
  #4   Report Post  
Old February 15th 05, 07:33 PM
No I Am Not Him
 
Posts: n/a
Default

Vinnie S. wrote:
While I solved one problem on SSB, another continues.


I am still having that "carrier" problem on SSB. For some reason, as

soon as
I speak into the mic, the radio holds power, as if it were on AM. The

TX meter
on the radio shows this, and the SWR/power meter shows this. The

power is not
fluctuating with modulation. The ALC was not cranked up. The power is

not high,
about 20 watts peak. Like I said, it seems to do this as soon
as I speak into the mic. Even a subtle noise will send it to max, and

stay
there. Changed mics, and have the same problem.

So then I tried this.

I took this radio and put it in my car (it's my only radio). When I

connect it
directly to the Wilson 1000 barefoot, I get the same problem on SSB.

However,
when I go thru the amp, it works perfectly, no power unless I

modulate. This is
also true if the amp is turned on or off. It appears to be an

impedance
mismatch. Since the amp input is a perfect match, the problem goes

away, whether
or not the amp power is on or off. Here is the kicker. The SWR on my

home
antenna is about 1.3-1.5 across the band.

Any suggestions?



Vinnie S.




Keyclown radio + amp + keyclown radio theory = constant problems,
that's what is going on, Vinnie.