Dave Hall wrote:
On Tue, 15 Feb 2005 16:11:21 GMT, "U Know Who"
wrote:


Sometimes this problem is caused by added mods that people add to
try
to squeeze a few more watts out of it. There are added capacitors
on
the bottom side of the board that can cause this. If you see an
extra
cap (or two in parallel) on the underside of the board connected
to
the final, remove it and that should cure your problem.


You nailed it on the head. Cover off, oscillation gone. Now I have
to
isolate
it.

Vinnie S.

Rebias the output.

Probably not a bad idea.

Dave
"Sandbagger"


Look at this crap, http://www.cbtricks.com/~rogerbird/2510/3rf.htm, you
people are totally flying blind with radio butcher mods like that.