RB wrote:
Brings back scenes from old WWII movies....
Small loops are still used and seem to be very effective for DF. I think that
the ARRL antenna book provides information in this direction. One system I
saw used a short ferrite dipole array.
In most cases, DF sets displayed their goniometer outputs on a CRT or as
signal strength on a meter. In this case, the dots and dashes melded into
a continous output because of the persistence of the CRT or the AGC delay
of the receiver.
The first DF equipment I used on the ships was WWII vintage and very
effective on any type of signal.
Irv VE6BP
--
--------------------------------------
Diagnosed Type II Diabetes March 5 2001
Beating it with diet and exercise!
297/215/210 (to be revised lower)
58"/43"(!)/44" (already lower too!)
--------------------------------------
Visit my HomePage at
http://members.shaw.ca/finkirv/index.html
Visit my Baby Sofia website at
http://members.shaw.ca/finkirv4/index.htm
Visit my OLDTIMERS website at
http://members.shaw.ca/finkirv5/index.htm
--------------------
Irv Finkleman,
Grampa/Ex-Navy/Old Fart/Ham Radio VE6BP
Calgary, Alberta, Canada