The more wire up in the air, the more electrical energy will be generated in
it by passing radio waves or waves of any electromagnetic type. You will get
more noise, and if your radio isn't sufficiently selective you will have
more signals overlapping because they are stronger. The other side of the
coin is that you will get more of a weak signal too. The best radioes are
able to operate well with weak signals with nearby strong ones without undue
interference. A ground may help a lot. A metal rod pounded into the ground
is good - keep the length of the wire connecting the receiver to the ground
as short as possible. If you have other radioes, tv's computers etc., keep
them turned off while you listen.


~~~~~ God gives Peace not war +
"Moi" wrote in message ...
That's the one I have, an RF Systems Magnetic Longwire Balun (MLB) ..


"RHF" schreef in bericht
oups.com...
TEST,
.
Yes - In general the more Wire the Better "Works" to a degree;
and your two Shortwave Receivers can handle more wire then most
'portable' AM/FM Shortwave Radios.
.
What you call a Longwire Antenna is more generally described as
a Random Wire Antenna; because it is not 'cut' for one frequency
and one or more Wave Lengths (WL) long.
.
For a Shorwave Listener's (SWL) Random Wire Antenna the 'preferred'
lay-out is to have a Long and Elevated Wire Antenna Element that is
connected to a Matching Transformer (near ground level) with a
Ground Rod and Ground; using a Coax Cable Feed-in-Line to the
Radio/Receivers.
.
READ - The Inverted "L" Antenna - It's 'basic' Lay-Out and Structure
The Inverted "L" {Shortwave Listerner's} Antenna - "Why-It-Works"
http://groups.yahoo.com/group/Shortw...a/message/1969

http://groups-beta.google.com/group/...b3ddbed819958d

.
For a Shortwave Listerner's (SWL) Antenna 'bending' the Antenna
Wire Element is not a problem. Using Insulated (Plastic Overed)
Wire has its Advantages and 'stranded' wire is usually easier to
work with then solid. The use of Insulators at the Wire-Ends and
other Mounting Points is a 'good' Construction Technique.
.
READ - Three "Must" Links to Read -wrt- Low Noise SWL Antenna
http://groups.yahoo.com/group/Shortw...na/message/949
.
READ - "Low Noise Shortwave Listener (SWL) Antenna
for most Radio/Receivers" [NO Antenna Tuner Required]
http://groups.yahoo.com/group/Shortw...a/message/1525
http://groups.yahoo.com/group/Shortw...a/message/1024
.
For most Shortwave Listeners (SWLs) who are considering building
and using a Low Noise Inverted "L" Antenna.
.
READ - Inverted "L' Antenna Reading List
http://groups.yahoo.com/group/Shortw...na/message/374
.
READ - The 'simple' Answer (in most cases) is the
Low Noise Inverted "L" Antenna
http://groups.yahoo.com/group/Shortw...a/message/1785
.
NOTE - When properly laid-out, arranged and constructed;
the Inverted "L" Antenna provides a relatively 'low noise'
"Omni-Directional" Shortwave Listener's (SWL) Antenna.
.
iane ~ RHF
.
All are WELCOME and "Invited to Join" the
Shortwave Listener (SWL) Antenna eGroup on YAHOO !
http://groups.yahoo.com/group/Shortwave-SWL-Antenna/
.
Some Say: On A Clear Day You Can See Forever.
http://groups.yahoo.com/group/Shortw...na/message/502
.
I BELIEVE: On A Clear Night . . .
You Can Hear Forever and Beyond, The BEYOND !
With a Shortwave Listener SWL Antenna of your own making.
"If You Build It {SWL Antenna} You Will Hear Them !"
.
.
= = = test wrote:
Hi from the Netherlands.

Question.

I just installed a new longwire antenna. And because I always heard:
"'the more wire the better"' I have installed a sort of long U,
doubling my regular wire lenght...

One end of the U is attatched to an isolator on the first floor and
from there it goes down to the garden to another isolator, and from
there it goes back up to another isolator. The coax goes to a balun
and to my ar3000a and or Kenwood 1000r.

The antenna wires don't touch and they are plastic coated.

did I do the right thing? seems have a lot of interference....

txs

7373

Joost
.