mike maghakian wrote:

to anyone that has an R7 and does not use the AUX-7 board, you are killing
yourself !!!

here are directions:

http://www.dproducts.be/Drake_Museum/aux-72.htm

http://home.cinci.rr.com/w8pu/aux7warc.jpg

By the way... if one is going to use this with the R7 for a receive only
application the connection to pin 10 is not required.

dxAce
Michigan
USA



wrote in message
oups.com...
Mike:
I have a R7 and the AUX-7 to install. Can you help me with how you
wired the diodes for the SWBC bands?
mike maghakian wrote:
mine was a gilfer SWL special with 1.8, 2.3, 3 , 4, 6 filters

when I got mine I then bought the AUX-7 board and diode programmed it
for
the SWBC bands. now it is a joy to operate. the few days I had it
without
the board almost drove me crazy.


I'm running the 8, 6, 4, 3 and 2.3 kHz filters in the one I have
here at
present.

dxAce
Michigan
USA