Thanks. I had found that lamp in the Mouser catalog. However, the
last time I applied power to the IC-28H, one of the lamps came back to
life. When I observe it from the backside of the circuit board, the
lamp has a definite green glow. I assume this is what gives the green
look to the display. I read a message from one person who used amber
LED's to give it an amber display. This leads me to conclude that the
color of the lamp light is what determines the color of the display.
I have not seen any 7219 lamps on the Internet that are green. Still
looking.

Dick

On Thu, 31 Mar 2005 16:50:51 -0600, Ron wrote:

Try part number 606-CM7219 from mouser.com, $0.35 each.

Ron - K0QVF

Dick wrote:

My Icom IC-28H has gone dark. Looks like both lamps are gone. The
schematic lists these lamps as HRS-7219A-G40. I found a couple of
places that had minimum orders of $100 and $300 respectively. That's
out. I read a message on eham.net where a ham had replaced these
lamps with amber LED's and appropriate resistors. Anyone done this?
Other options?

Dick - W6CCD