On my IC-28H there are green boots over clear lamps. Just take the boot
off the old lamps and put them on the new ones.

Ron - K0QVF

Dick wrote:
On Fri, 01 Apr 2005 00:57:17 -0000, (Dave Platt)
wrote:


In article ,
Dick LeadWinger wrote:


Thanks. I had found that lamp in the Mouser catalog. However, the
last time I applied power to the IC-28H, one of the lamps came back to
life. When I observe it from the backside of the circuit board, the
lamp has a definite green glow. I assume this is what gives the green
look to the display. I read a message from one person who used amber
LED's to give it an amber display. This leads me to conclude that the
color of the lamp light is what determines the color of the display.
I have not seen any 7219 lamps on the Internet that are green. Still
looking.

How about using a standard bulb (as in the Mouser catalog) and giving
it a light coat of green nail polish? A light-green LED with series
dropping resistor might also give you the desired hue.


I have been thinking about trying the amber LED's. I also sent an
e-mail to Icom to see what they can tell me.

Dick